Bench vice

-

 A bench vise is a type of vise that is mounted on a workbench. It is used to hold an object stationary so that it can be worked on with hand tools.

The bench vice is used to clamp materials such as wood, metal, or plastic in order to cut, shape, or drill them. It can also be used for holding objects while they are being glued or painted.

Bench vises are often used in woodworking and metalworking workshops. They are also found in machine shops and factories where they are often permanently mounted to the floor or a large table and may be electrically powered.

Comments

Post a Comment

Popular posts from this blog

How to Use an Anvil Tool and Bench Vise

-
Image
An anvil tool and bench vise are key components of any woodworking shop, whether it’s in the corner of your basement or built out in your backyard shed. An anvil tool and bench vise come in many different shapes and sizes, but no matter what you choose, the main function remains the same—holding pieces of wood firmly and securely while you cut them with a saw, chisel, router, etc. Here’s how to use an anvil tool and bench vise properly to get the most out of your workshop tools! A brief history of the anvil The anvil is a tool that has been used by blacksmiths for centuries. It is a heavy metal block that is used to pound on hot metal. The anvil has a horn, which is used to shape the metal, and a face, which is used to flatten the metal. There are also different types of bench vises , which are used to hold the metal in place while it is being worked on. The most common type of bench vice is the hand vice, which is held in the hand and operated with a lever. The different kinds of anv
Read more

Blacksmith Anvil Parts and its uses

-
Image
Blacksmith Anvil is a large and heavy-weight metallic block used for metalworking. These Anvils are made up of special graded cast iron. Anvil tools are used for making tools or project that falls in the category of metalworking like chains, knives, blades, and many more. There are different parts of anvil used for different purposes: 1. The face of the anvil 2. The horn of the anvil 3. The Table of the anvil 4. The Hardie Hole 5. The Pritchel Hole Each of these anvil tool parts plays an important role, which we have described in the following section: 1. Face of Anvil: The face of the anvil is the primary surface where most of the work is done, which is located on the top of its structure. It is used to shape different metals by striking with the hammer. It resists most of the load and pressure when the hammer is striking on it. It is usually made up of high-quality material because it has to handle high pressure. 2. The horn of the Anvil: For bending the rods, the horn of the anvil i
Read more